Toshiba GRL150-100 Series Instruction Manual page 236

ENVIRONMENTAL PERFORMANCE CLAIMS
Test
Atmospheric Environment
Temperature IEC60068-2-1/2
Humidity IEC60068-2-78
Enclosure Protection IEC60529
Mechanical Environment
Vibration IEC60255-21-1
Shock and Bump IEC60255-21-2
Seismic IEC60255-21-3
Electrical Environment
Dielectric Withstand IEC60255-5
High Voltage Impulse IEC60255-5
Electromagnetic Environment
High Frequency IEC60255-22-1 Class 3,
Disturbance / Damped IEC61000-4-12 /
Oscillatory Wave EN61000-4-12
Electrostatic Discharge IEC60255-22-2 Class 3,
IEC61000-4-2 / EN61000-4-2
Radiated RF IEC60255-22-3 Class 3,
Electromagnetic IEC61000-4-3 / EN61000-4-3
Disturbance
Fast Transient IEC60255-22-4,
Disturbance IEC61000-4-4 / EN61000-4-4
Surge Immunity IEC60255-22-5,
IEC61000-4-5 / EN61000-4-5
Conducted RF IEC60255-22-6 Class 3,
Electromagnetic IEC61000-4-6 / EN61000-4-6
Disturbance
Power Frequency IEC60255-22-7,
Disturbance IEC61000-4-16 /
EN61000-4-16
Conducted and IEC60255-25,
Radiated Emissions EN55022 Class A,
IEC61000-6-4 / EN61000-6-4
Standards
Operating range: -10°C to +55°C.
Storage / Transit: -25°C to +70°C.
56 days at 40°C and 93% relative humidity.
IP51 (Rear: IP20)
Response - Class 1
Endurance - Class 1
Shock Response Class 1
Shock Withstand Class 1
Bump Class 1
Class 1
2kVrms for 1 minute between all terminals and earth.
2kVrms for 1 minute between independent circuits.
1kVrms for 1 minute across normally open contacts.
Three positive and three negative impulses of 5kV(peak),
1.2/50μs, 0.5J between all terminals and between all terminals
and earth.
1MHz 2.5kV applied to all ports in common mode.
1MHz 1.0kV applied to all ports in differential mode.
6kV contact discharge, 8kV air discharge.
Field strength 10V/m for frequency sweeps of 80MHz to 1GHz
and 1.7GHz to 2.2GHz. Additional spot tests at 80, 160, 450,
900 and 1890MHz.
4kV, 2.5kHz, 5/50ns applied to all inputs.
1.2/50μs surge in common/differential modes:
HV ports: 2kV/1kV
PSU and I/O ports: 2kV/1kV
RS485 port: 1kV/ -
10Vrms applied over frequency range 150kHz to 100MHz.
Additional spot tests at 27 and 68MHz.
300V 50Hz for 10s applied to ports in common mode.
150V 50Hz for 10s applied to ports in differential mode.
Not applicable to AC inputs.
Conducted emissions:
0.15 to 0.50MHz: <79dB (peak) or <66dB (mean)
0.50 to 30MHz: <73dB (peak) or <60dB (mean)
Radiated emissions (at 30m):
30 to 230MHz: <30dB
230 to 1000MHz: <37dB
⎯ 235 ⎯
6 F 2 S 0 8 2 8
Details