Toshiba GRL150-100 Series Instruction Manual page 101

/ 3
• C o m m o n
• G r o u p 1
• G r o u p 2
• G r o u p 3
• G r o u p 4
Changing the Common settings
• Select "Common" to set the AC input imbalance monitoring and the differential current
monitoring, and press the ENTER key.
/ 4
C T S V E N
O f f / A L M & B L K / A L M
I D S V E N
O f f / A L M & B L K / A L M
<CTSVEN>
To set AC input imbalance monitoring enable, do the following.
• Enter 0(=Off) or 1(=ALM&BLK) or 2(=ALM) by pressing the
ENTER key.
< IDSVEN>
To set differential current monitoring enable, do the following.
• Enter 0(=Off) or 1(=ALM&BLK) or 2(=ALM) by pressing the
ENTER key.
Changing the Group settings
• Select the "Group ∗ " on the "Act gp.= *" screen to change the settings and press the ENTER
key.
/ 4
• P a r a m e t e r
• T e l e c o m m .
• T r i p
Setting the parameter
Enter the line name and the CT ratio as follows:
• Select "Parameter" on the "Group ∗ " screen to display the "Parameter" screen.
/ 5
• L i n e
• C T
• Select "Line name" to display the "Line name" screen.
• Enter the line name as a text string and press the
• Select "CT ratio" to display the "CT ratio" screen.
/ 6 C T
g p . = ∗
A c t
C o m m o n
2
2
G r o u p ∗
P a r a m e t e r
n a m e
r a t i o
r a t i o
⎯
100
_
_
or
or
key.
EN D
⎯
6 F 2 S 0 8 2 8
key and press the
key and press the