Toshiba GRL150-100 Series Instruction Manual page 54

POWD
DC
DC/DC
supply
Converter
Binary
Photo-coupler
input
× 8
AC input
CT × 4
I
(Max)
Local
personal
computer
POWD Module
The POWD module insulates between the internal and external circuits through an auxiliary
transformer and transforms the magnitude of AC input signals to suit the electronic circuits. The
AC input signals may be one to three phase currents and a residual current depending on the relay
model.
This module incorporates max. 4 auxiliary CTs, DC/DC converter and 8 photo-coupler circuits for
binary input signals.
The available input voltage ratings of the DC/DC converter are, 24V, 48V, 110V/125V or
220/250V. The normal range of input voltage is −20% to +20%.
SPMP Module
The SPMP module consists of analogue filter, multiplexer, analogue to digital (A/D) converter,
main processing unit (MPU), random access memory (RAM) and read only memory (ROM) and
executes all kinds of processing such as protection, measurement, recording and display, and also
executes communication control processing of local and received data, memories (RAM and
ROM), parallel-to-serial and serial-to-parallel data converter, and electrical-to-optical and
optical-to-electrical converter.
The analogue filter performs low-pass filtering for the corresponding current signals.
The A/D converter has a resolution of 12 bits and samples input signals at sampling frequencies of
2400 Hz (at 50 Hz) and 2880 Hz (at 60 Hz).
SPMP
A/D
Analogue Multi-
filter plexer converter
Figure 3.1.1.2 Hardware Block Diagram
MPU
RAM ROM
Human machine
Interface (HMI)
Liquid crystal display
16 characters × 2 lines
Operation keys
LEDs
Monitoring
RS232C
jacks
I/F
⎯ ⎯
53
6 F 2 S 0 8 2 8
5kV
insulation
P/S
E/O
S/P
O/E
Auxiliary relay
× 8
RS485
Transceiver
× 1 or 2
or Optical I/F
Pilot wire
communication
Fibre optic
communication
Binary output
(Trip x 2
Alarm x 5
Fail x 1)
Relay
setting and
monitoring
system
or
IEC60870-5
-103