Compaq AlphaServer GS80 User Manual page 79

The SMC is configured with the number of consoles chosen at installation. Since
ConsoleWorks does not allow direct renaming of a console, to change a name,
you must delete the console and add a new one with the name you choose.
NOTE: If the Show Consoles screen lists the maximum number of consoles
permitted by the ConsoleWorks license (not including the ConsoleWorks
internal console, CONWRKS), be sure to delete the console before
adding a new one.
1. Determine the console's properties.
a. In the left navigation panel select Operations. From the selection links
select Consoles. The Show Consoles screen opens.
b. Select the console you want to rename from the list in the main data
panel. The console_name Configuration screen opens (Figure 3–21).
c. Note the properties of this console, including the IP host and IP port
numbers, profile access, special characters, log file, and raw characters.
2. Delete the console (see Section 3.3.2).
3. Create a new console with the selected name and the properties noted in
step 1c (see Section 3.3.3).
NOTE: The console name is included in the name of the log files for that
console. Log files may have been generated for the console prior to the
renaming. These file names will not change; that is, the old console
name will remain in the name of the log files.
ConsoleWorks 3-37