Add Or Modify Hard Partition Screen - Compaq AlphaServer GS80 User Manual

6. Repeat steps 3 through 5 to add other partitions.
As QBBs are added, the message below the Total block indicates if the
hardware requirements of a partition have been met. Each partition must have
at least one CPU, 64 Mbytes of memory, and an I/O riser module that is
connected to a master PCI box with a standard I/O module. The partition
shown in Figure 4–11 does not yet have a connection to a PCI box with a
standard I/O module. In Figure 4–12 this is resolved by adding QBB 7 to the
partition. The message below the Total block now indicates that the hardware
requirements for a partition have been met.
NOTE: You can add an unpowered QBB to a partition if that partition
already has at least one QBB that is powered and if the hardware
requirements for a valid partition have been met. Memory in the
unpowered QBB cannot be seen until the QBB is powered on.
Figure 4–12 Add or Modify Hard Partition Screen
Compaq AlphaServer Partition Manager 4-19