Add Or Modify Soft Partition Screen - Compaq AlphaServer GS80 User Manual

1. In the Basic Soft Partition screen (Figure 4–25), click to select the partition
you want to modify and click the Modify... button. The Add or Modify Soft
Partition screen displays (Figure 4–26).
2. Do one of the following in the Add or Modify Soft Partition screen:
•
Add another QBB to this soft partition by clicking on a QBB in the box
labeled Hard partition resources and clicking the Add button. Continue
doing this until you have added all the QBBs that belong in this soft
partition. Click OK; or
•
Remove a QBB from the soft partition by clicking on a QBB in the box
labeled Resources assigned to this partition and clicking the Remove
button. Click OK.
3. The Basic Soft Partition screen returns. Optionally change the amount of
shared memory by moving the slider to the preferred amount and change
the allocation by clicking the checkbox labeled Allocate shared memory
equally among QBBs. Click OK.
Figure 4–26 Add or Modify Soft Partition Screen
Compaq AlphaServer Partition Manager 4-35