Loading And Configuration - Compaq AlphaServer GS80 User Manual

which contains the trigger text and a defined number of displayed lines before
and after this text, to determine if this event is one of which a user needs to be
notified. These subevents are:
~E~ FAN. FAIL - POWEROFF IN 30 SECONDS
~E~ LM80. TEMP FAIL
~E~ PS. POK DEASSERTED
MAIL.PL then formats a mail addressee, subject, and message body from this
information, and contacts (through a TCP/IP socket, port 25) an SMTP (Simple
Mail Transport Protocol) server and sends this mail message.
It is assumed that a gateway exists at the user site that will forward this mail
message to the mail system used at the installation site, similar to the way mail
is received from the Internet. This script cannot send mail to non TCP/IP
SMTP mail servers, such as Lotus Notes, Mail-11 (VAXmail) or X.400 without
such a gateway.
This script does not acknowledge the event to the ConsoleWorks subsystem.
B.2.1

Loading and Configuration

MAIL.BAT and MAIL.PL are copied to the event directory,
C:\Cwks\Default\Actions\Event.
Edit MAIL.PL to change the value of the variable $remote to point to the site's
SMTP mail server. Find this section and modify the variable:
#------------------------------------------------------------
#+
# WARNING !!!
# ===========================
# This file MUST be modified before it can be used.
#
# The smpt e-mail server that is used at the customer's site
# needs to be placed into the command below.
#
# It can be entered as a numerical TCPIP address or by node
# name. For example:
# $remote = "16.158.232.65"
# or
# $remote = "my.email.server.name.com"
#
# In the line below insert the customer's smpt e-mail server
# address or name between the quotation marks:
#
$remote = "post-office.domain.com";
#-
#------------------------------------------------------------
Compaq-Supplied Configuration Files for ConsoleWorks B-3