Compaq AlphaServer GS80 User Manual page 63

4. Double-click the KEA! desktop icon to open KEA!. In the connection wizard
do the following:
a. Select Serial. Click Next.
b. Select Telnet. Click Next.
c. Enter the host name or IP address (not the IP host number) of the
GS80/160/320 system and the telnet port number of the console (Figure
3–11). See Table 3–4 for the telnet port number, which is at the
intersection of the IP host and IP port numbers that you noted in step 3.
Click Next.
d. Select a terminal type. Click Next.
e. Select a file transfer protocol. Click Next.
f. Click Finish. The KEA! window opens.
5. When prompted for a username and password, enter those of a valid
ConsoleWorks account.
ConsoleWorks 3-21