Configuring The Smc System To Restart After A Power Failure; Switch Setting For Models Dpenm And Dpend - Compaq AlphaServer GS80 User Manual

6.6 Configuring the SMC System to Restart After a
Power Failure
The SMC system should power up and boot following a power failure. If
it does not, corrective action is necessary. The action to take depends
on the system model.
Figure 6–13 Switch Setting for Models DPENM and DPEND
6-24 System Management Console User's Guide
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
PK-2733-00