Windows 2000 Usb Driver - Analog Devices ADSP-21992 EZ-KIT LITE System Manual

Installation Tasks
The driver installation is now complete, as shown in
Figure 1-8. Completing Software Installation
12. Click Finish to exit the wizard.
13.Verify the installation by following the instructions in
Driver Installation" on page

Windows 2000 USB Driver

VisualDSP++ 3.5 installation software pre-installs the necessary drivers for
the selected EZ-KIT Lite. The install also upgrades an older driver if such
is detected in the system.
$
Prior to running the VisualDSP++ 3.5 installer, ensure there are no
other Hardware Wizard windows running in the background. If
there are any wizard windows running, close them before starting
the installer.
1-12
1-15.
ADSP-21992 EZ-KIT Lite Evaluation System Manual
Figure 1-8.
"Verifying