Purpose Of This Manual - Analog Devices ADSP-21992 EZ-KIT LITE System Manual

• PWM outputs connector
• Encoder interface connector
• SPORT connector
• RS-232 connector
• External memory interface connector
The EZ-KIT Lite board has a Flash memory device that can be used to
store user-specific boot code. You can configure a jumper (
program the Flash memory to run the board as a stand-alone unit. For
information about using the Flash memory, see
Utility" on page
Additionally, the EZ-KIT Lite board provides un-installed expansion con-
nector footprints that allow you to connect to the processor's External
Memory Interface (EMI).

Purpose of This Manual

The ADSP-21992 EZ-KIT Lite Evaluation System Manual provides
instructions for using the hardware and installing the software on your
PC. This manual provides guidelines for running your own code on the
ADSP-21992 EZ-KIT Lite. The manual also describes the operation and
configuration of the evaluation board's components. Finally, a schematic
and a bill of materials are provided as a reference for future ADSP-21992
board designs.
ADSP-21992 EZ-KIT Lite Evaluation System Manual
2-6.
Preface
switch) and
SW1
"Using Flash Programmer
xi