I/O Connectors; Sata (Serial Ata) & Power Connectors; Digital I/O Connector - DFI ST102-CS User Manual

I/O Connectors

SATA (Serial ATA) & Power Connectors
Features
• 2 Serial ATA 3.0 ports with data transfer rate up to 6Gb/s (SATA 0 and SATA 1)
The Serial ATA connectors are used to connect Serial ATA devices. Connect one end of the Se-
rial ATA data cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drives in the Advanced menu ("SATA Configuration" submenu) of the
BIOS. Refer to Chapter 7 - BIOS for more information.
ST102-CS
SATA
+12V
1
Power
Ground
Ground
4
+5V
SATA 1
SATA
Data
SATA 0
SATA 3.0 6Gb/s
1 GND
TXP
TXN
GND
RXN
RXP
7
GND
21

Digital I/O Connector

The 8-bit Digital I/O connector provides the ability to monitor and control connected exter-
nal devices.
Digital I/O Connector
Pins
1
2
3
4
5
6
7
8
1
+12V
Ground
Digital I/O power
5VSB
+5V
4
Digital I/O
1
Function
DIO7
DIO6
DIO5
DIO4
DIO3
DIO2
DIO1
DIO0
www.dfi.com