DFI ST102-CS User Manual page 33

CPU Configuration
This section configures the CPU.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
CPU Configuration
Intel (VMX) Virtualization [Enabled]
Technology
Active Processor Cores [All]
Hyper-Threading [Enabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Intel (VMX) Virtualization Technology
When this field is enabled, the VMM can utilize the additional hardware capabilities pro-
vided by Vanderpool Technology.
Active Processor Cores
Select number of cores to be enabled in each processor package: all, 1, 2, 3, 4 or 5.
Hyper-Threading
Enable or disable Hyper-threading. When it is enabled, a physical core will perform as two
logical processors, and the user may experience better computational efficiency of the
system. Please make sure that the OS operating on your system is optimized for Hyper-
Threading, e.g. Windows and Linux. This field is not available when the equipped CPU
does not support Hyper-threading.
ST102-CS
Power & Performance
Configure the power and performance settings in this page.
When enabled, a VMM
can utilize the additional
hardware capabilities
provided by Vanderpool
Technology.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
37
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Power & Performance
Intel(R) SpeedStep(tm) [Enabled]
Turbo Mode [Enabled]
C states [Enabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Intel(R) SpeedStep(tm)
Enable or disable Intel Enhanced SpeedStep Technology. Voltage and frequency are
switched between high and low levels in response to processor load when this field is
enabled, and the Turbo Mode field will appear.
Turbo Mode
Enable or disable processor turbo mode, which allows the processor core to automati-
cally run faster than the base frequency when the processor's power, temperature,
and specification are within the limits of TDP. This field is only available when "Intel(R)
SpeedStep(tm)" is enabled.
C states
Enable or disable CPU Power Management. When enabled, the CPU is allowed to go to C
states when it's not 100% utilized.
Allows more than two
frequency ranges to be
supported.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com