DFI ST102-CS User Manual page 42

USB Configuration
This section is used to configure the USB settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
USB Configuration
Legacy USB Support [Enabled]
[Enabled]
XHCI Hand-off
[Enabled]
USB Mass Storage Driver Support
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Legacy USB Support
Enabled Enable Legacy USB support.
Disabled Keep USB devices available only for EFI applications.
Auto
Disable Legacy support if no USB devices are connected.
XHCI Hand-off
Enable or disable XHCI Hand-off.
USB Mass Storage Driver Support
Enable or disable USB Mass Storage Driver Support.
ST102-CS
CSM Configuration
This section is used to configure the CSM settings.
Enables Legacy USB
support. AUTO option
disables legacy support if
no USB devices are con-
nected. DISABLE option
will keep USB devices
available only for EFI
applications.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
46
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Compatibility Support Module Configuration
CSM Support [Enabled]
Boot option filter [UEFI only]
Option ROM execution
Network [Do not launch]
Storage [UEFI]
Video [UEFI]
Other PCI devices [UEFI]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
CSM Support
This section is used to enable or disable CSM Support. When CSM Support is set
to enabled, several options will appear for configuration.
Boot option filter
This field controls Legacy/UEFI ROMs priority.
Network
This field controls the execution of UEFI and Legacy Network OpROM.
Storage
This field controls the execution of UEFI and Legacy Storage OpROM.
Video
This field controls the execution of UEFI and Legacy Video OpROM.
Other PCI devices
This field determines OpROM execution policy for devices other than Network,
Storage or Video.
Enable/Disable CSM
Support.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com