DFI ST102-CS User Manual page 45

► PEG Port Feature Configuration
This section configures the PEG port.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
PEG Port Feature Configuration
Detect Non-Compliance Device [Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Detect Non-Compliance Device
Enable or disable this field to detect non-compliance PCIe devices in the PEG.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
ST102-CS
PCH-IO Configuration
Detect Non-Compliance
PCI Express Device
in PEG
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
49
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
PCH-IO Configuration
PCI Express Configuration

SATA And RST Configuration

HD Audio Configuration

[Enabled]
LAN1(I219)
[Enabled]
Wake on LAN Enable
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
► PCI Express Configuration
Please refer to the following pages.
► SATA And RST Configuration
Please refer to the following pages.
► HD Audio Configuration
Please refer to the following pages.
LAN1(I219)
Enable or disable onboard NIC.
Wake on LAN Enable
Enable or disable integrated LAN to wake the system.
PCI Express Configuration
settings
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com