DFI ST102-CS User Manual page 38

NCT6116D Super IO Configuration
TThis section is used to configure the I/O functions supported by the onboard Super I/O chip.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
NCT6116D Super IO Configuration
NCT6116D
Super IO Chip
WatchDog Timer Unit [Second]
0
SuperIO WatchDog Timer
Serial Port 1 Configuration

Serial Port 2 Configuration

Serial Port 3 Configuration

Serial Port 4 Configuration

Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
WatchDog Timer Unit
Select WatchDog Timer Unit: Second or Minute.
SuperIO WatchDog Timer
Set SuperIO WatchDog Timer Timeout value. The range is from 0 (disabled) to 255.
► Serial Port 1/2/3/4 Configuration
Configure the parameters of serial port 1 (COM 1) to serial port 4 (COM 4) as detailed
later.
ST102-CS
WatchDog Timer Unit
Selection
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
42
► Serial Port 1/2/3/4 Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
[RS232]
Electrical Interface Mode
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Serial Port
Enable or disable the serial COM port.
PCI Express Configuration
Select a PCI Express root port and press "Enter" to configure.
Enable or Disable Serial
Port (COM)
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com