Table of Contents
Advertisement
Installing a 2.5" SATA Drive
The system can accommodate one 2.5" SATA drive. Please use the following procedure to in-
stall a 2.5" SATA drive:
1.
Remove the 3 mounting screws that secure the drive bay to the system.
Mounting screw
HDD bracket
Mounting screw
Mounting screw
2.
Align the mounting holes on the SATA drive with the mounting holes on the HDD bracket.
SATA mounting screws
Mounting screw
ST102-CS
3.
Use the mounting screws provided in the drive bay kit to attach the HDD bracket onto
the drive bay and secure the drive in place.
HDD bracket mounting screws
SATA mounting screws
HDD bracket
12
HDD bracket mounting holes
(on the drive bay's
bottom side)
Mounting screw
www.dfi.com
Advertisement
Table of Contents
