DFI ST102-CS User Manual page 35

► AMT Configuration ► Secure Erase Configuration
This section is used to configure Secure Erase.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Secure Erase mode [Simulated]
Force Secure Erase [Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Secure Erase Mode
Select Secure Erase module behavior: Simulated or Real.
Force Secure Erase
Enable or disable Force Secure Erase on next boot.
ST102-CS
Change Secure Erase
module behavior:
Simulated: Performs SE
flow without erasing SSD
Real: Erase SSD.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
39
► AMT Configuration ► OEM Flags Settings
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Hide Unconfigure ME Confirmation [Disabled]
Prompt
Unconfigure ME [Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Hide Unconfigure ME Confirmation Prompt
Enable or disable to hide unconfigure ME confirmation prompt when attempt-
ing ME unconfiguration.
Unconfigure ME
Enable or disable to unconfigure ME with resetting MEBx password to default.
OEMFlag Bit 6:
Hide Unconfigure ME
confirmation prompt when
attempting ME uncon-
figuration.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com