Declaration Of Conformity - sauter SlabMatrix Basic 1.0 User Manual

Routing and drilling device
28

Declaration of conformity

EC-Declaration of Conformity
according to Machine Directive 2006/42/EC, Annex II A
manufacturer:
sauter GmbH Tel.: +49 8143 99129-0
Neubruch 4 E-Mail: info@sautershop.de
Gewerbepark Inning-Wörthsee Internet: www.sautershop.de
82266 Inning
We hereby declare that the
routing and milling device
SlabMatrix Basic 1.0
and
SlabMatrix Pro 1.0
in the version supplied by us complies with the health and safety requirements of the Machinery Di-
rective 2006/42/EC.
This declaration loses its validity if changes are made to the device that have not been agreed by
the manufacturer.
Responsibility for the technical documentation is taken by the managing director of
sauter GmbH.
Supplementary note:
The routing and drilling device is intended for using routers to machine workpieces made of wood
and materials similar to wood. The technical documentation for the routers used applies unchanged
and without restriction.
84