List Of Illustrations - sauter SlabMatrix Basic 1.0 User Manual

10.7 Using of the Mafell Duodübler DDF 40 and DD 40 P ____________________________ 76
11 Options for the routing and drilling device ______________________________________ 78
11.1 SlabMatrix Pro 1.0: Longitudinal rails for extending the Y-axis (Art. No. SA-SM-EXT-KIT)
_____________________________________________________________________ 79
11.2 Adapter plate with laser (Art. No. SA-SM-LASER) ______________________________ 80
11.3 Laser unit sideways (Art. No. SA-SM-LASER-SIDE) _____________________________ 81
11.4 Wall bracket (Art. No. SA-SM-RACK) ________________________________________ 82
11.5 Clamping and stop set (Art. No. SA-SM-KIT-BASIC und Art. No. SA-SM-KIT-PRO) ____ 82
11.6 Hose bar (Art. Nr. SA-SM-HOSE-BAR) _______________________________________ 83
11.7 Brush kit (Art. Nr. SA-SM-BRUSH-KIT) _______________________________________ 83
12 Service and maintenance ___________________________________________________ 83
13 Environment _____________________________________________________________ 83
14 Warranty ________________________________________________________________ 83
15 Declaration of conformity ___________________________________________________ 84
16 Annex ___________________________________________________________________ 85

List of illustrations

Figure 1: SlabMatrix Pro 1.0 _____________________________________________________ 45
Figure 2: Components SlabMatrix Basic 1.0 _________________________________________ 53
Figure 3: Adapter plate OF 55 ___________________________________________________ 54
Figure 4: Adapter plate OF 100 __________________________________________________ 55
Figure 5: Mounting frame for fixing to the supports on the cross rails ____________________ 56
Figure 6: Attachment __________________________________________________________ 56
Figure 7: Sub-assembly mounting frame and cross rails; mounted ______________________ 56
Figure 8: Connecting the fastening bracket to the longitudinal rail _______________________ 57
Figure 9: Longitudinal rails with the pre-assembled supports ___________________________ 57
Figure 10: Mounting frame and cross rails connected to the longitudinal rails _______________ 57
Figure 11: Cross rails flush with the supports on the longitudinal rails _____________________ 58
Figure 12: Mounting frame in left position ___________________________________________ 58
Figure 13: Mounting frame in right position __________________________________________ 58
Figure 14: Routing and drilling device for mounting on the work plate ____________________ 59
Figure 15: Fastening the right longitudinal rail to the worktop ___________________________ 59
Figure 16: Mounting frame in front position __________________________________________ 59
Figure 17: Mounting frame closed to the rear ________________________________________ 60
Figure 18: Dust and chip brushes __________________________________________________ 60
Figure 19: Fixed adapter plate ____________________________________________________ 61
Figure 20: Fixing of the adapter plate ______________________________________________ 61
Figure 21: Fixed adapter plate ____________________________________________________ 61
Figure 22: Adjustable bolt of the base plate _________________________________________ 61
Routing and drilling device
47