Lcd Panel - Delta Amplon Series User Manual

Button
OFF/ ENTER
z
Button
z
SELECT
z
Button
z
z
ON/ MUTE
+ SELECT
Buttons

3.2 LCD Panel

8
7
Confirm selection key: Press this button to confirm selec-
tion in setting mode.
Switch LCD message: Press this button to change the LCD
message for input voltage, input frequency, battery volt-
age, output voltage and output frequency. It will return to
default display when pausing for 10 seconds.
Setting mode: Press and hold this button for 5 seconds to
enter setting mode when the UPS is in standby mode or
bypass mode.
Down key: Press this button to display the next selection
in setting mode.
Switch to bypass mode: When the main power is normal,
press the ON/ MUTE and SELECT buttons simultaneously
for 5 seconds. Then the UPS will enter bypass mode. This
action will be ineffective when the input voltage is out of
acceptable range.
1
Function
2 3
6
12
Chapter 3 Operation
4
5