Canon MultiPASS L6000 Software Manual page 218

R-Key (Europe only)
The R-Key options enable you to define the R-Key settings for your
MultiPASS printer. The options determine whether or not you are
connecting your MultiPASS printer to a PBX (Private Branch
Exchange) line to send PC faxes. If you are connecting to a PBX, you
also select the type of PBX line.
If you are connecting to a PBX line, you select PBX. Otherwise, you
select PSTN.
If you select PBX, in the PBX box, you select the type of PBX you are
operating with: Prefix, Hooking, or Earth Connection. (Note: Earth
Connection may not be available in your country.)
If you select Prefix as the PBX type, in the Prefix box, you enter the
prefix.
M-Key (United Kingdom only) (E-Key—Spain only)
You may be planning on using an alternative long-distance phone
service (such as 2300 Service of Mercury Communications) for
sending PC faxes. In this case, you use the M-Key (E-Key) options to
do the following:
When defining the M-Key (E-Key) settings:
8-8 MultiPASS Printer Setup and Other Utilities in the Desktop Manager
Enable you to set the One-Touch 6 button on your MultiPASS
printer to turn the connection to the alternative service on and
off. To do so, you select Use One-Touch Key 06 as M-Key (E-Key).
Define the settings for the One-Touch 6 button when using this
alternative service.
In the Access Code box, you select the access code given to you
by your service company.
If you select 131P as your access code, in the ID Code box, enter
your identification code.
Chapter 8