Moving An Image; Reversing The Image Tone; Mirroring An Image - Canon MultiPASS L6000 Software Manual

3. To draw the selected area, click Crop on the toolbar and drag the
mouse diagonally across the area of the image in the preview
window you want to select. The Width and Height text boxes display
the new sizes.
4. To further define the dimensions of the selected area, in the Width
and Height text boxes, type the appropriate values. The image
selection borders change to match the specified width and height.
5. If you want to select an entirely different area of the image, click
outside the crop lines to clear the current selection.
6. To preview the newly selected image area, click Preview.

Moving an Image

If the image is too large to see in its entirety, you can move the image
within the preview area to locate a relevant section.
To move an enlarged image:
On the toolbar, click Move Image and drag the zoomed image to display
the appropriate area or detail.

Reversing the Image Tone

You can create a negative of an image for stylistic effect. A negative image
is created by inverting the dark and light areas.
To reverse the tone of an image:
On the toolbar, click Negative/Positive.

Mirroring an Image

By mirroring an image, you can create an alternate version. For example,
you can create an alternate version of your company logo.
Chapter 6 Scanning 6-15