Adjusting Contrast/Brightness For Black And White Scan Mode - Canon MultiPASS L6000 Software Manual

Using a Custom Tone Curve
Custom tone curve files are saved in the MultiPASS directory. Use the
following steps to open a custom tone curve setting that you previously
saved.
To apply a previously saved curve:
1. On the Tone tab, click the Special Tone Curves button, and then click
Load.
2. In the Open dialog box, select the file name you want to load and
click Open.
Adjusting Contrast/Brightness for Black and White Scan
Mode
For black and white scans, the contrast and brightness settings are
located on the L6000 tab.
Depending on the black and white option you select for your scan, you
can adjust the contrast, brightness, or both of your preview image.
If you use halftone as your scan option, you can adjust both the contrast
and brightness of the image.
Chapter 6 Scanning 6-25