Clearing The Preview Area; Adjusting The Preview Image View - Canon MultiPASS L6000 Software Manual

Clearing the Preview Area

If the preview image does not serve your purpose, you can quickly
remove it from the preview area and rescan the image.
To remove the current preview image:
On the toolbar, click Clear Preview.

Adjusting the Preview Image View

To make it easier to work with your preview image, you can change
aspects of its display.
Changing the View Size
You can enlarge a preview image to better view its details. Each
enlargement doubles the size of the image up to a maximum of 4 times
the size of the original image.
As you enlarged the image, you can just as easily reduce it. Each
reduction decreases the size of the image by one-half.
To resize a preview image:
1. On the toolbar, click Zoom.
2. To enlarge, left-click the mouse pointer on the image.
To reduce, right-click the mouse pointer on the image.
Displaying Rulers
To work precisely with a preview image, you can display rulers on the
top and left borders of the preview area. The rulers display in inches or
centimeters, depending on what you have set as the unit of measure on
the Main tab.
To display rulers:
On the toolbar, click Rulers.
Chapter 6 Scanning 6-13