Changing The Printer Settings; An Alternative Method For Changing Printer Settings - Canon MultiPASS L6000 Software Manual

Changing the Printer Settings

Print options are the settings that determine how your document looks
when it is printed. Print options are initially installed using default
settings, allowing you to print documents immediately. However, you
may want to change these settings for certain documents.
The following instructions summarize the general procedures for
changing printer settings. For detailed information on specific printer
options, refer to later sections in this chapter.
To change print options:
1. With your document open, click the Print command. (In most
Windows NT applications, this command is on the File menu or
toolbar.)
2. In the Print dialog box, click Properties.
3. In the Printer Properties dialog box, on the Main and Paper tabs,
specify the desired printer options.
4. To save the changes and close the dialog box, click OK.
To close the dialog box without saving any changes, click Cancel.

An Alternative Method for Changing Printer Settings

You can also access printer driver options directly from the Windows NT
desktop. The following information summarizes the general method of
accessing printer options. For more detailed information, see your
Windows NT user documentation.
From the Windows NT desktop, click Start, point to Settings, and then
click Printers. In the Printers dialog box, select the Canon MultiPASS
printer icon. On the File menu, click Document Defaults. In the Printer
Default dialog box, specify the appropriate changes and click OK.
3-6 Printing with the MultiPASS Printer Chapter 3