Glossary - Canon Omnera 500A Operator's Manual

11 Appendix A

11.1 Glossary

A
Accessories
AEC
Alpha
B
Beta
Btu/hr
BU/Back-up
Bucky
C
CE
Centering
Collision
CR
D
DAP meter
Diode
Dealer
Detector
E
Operator´s Manual
2020-09-14
Extra facilities to the product which easily can be mounted by the user.
Automatic Exposure Control
A direction for a rotation movement.
A direction for a rotation movement. The tube turns around the Z-axis.
British thermal unit/hour
A precautionary measure that shuts off the exposure, if the AEC cham-
ber does not.
See Detector holder.
A CE-marked product verifies that the Manufacturer guarantees that
the product fulfils the EU fundamental health, environment and security
requirements.
The field of image is centered over the detector.
Either a physical collision with an obstacle or the node cannot reach its
end position.
Image plates.
Dose Area Product meter. The DAP-meter is placed next to the colli-
mator and measures the amount of X-ray radiation that leaves the
collimator.
Electrical component that leads voltage and current in one direction.
See "Supplier".
Image receptor for X-ray that does not require a cassette. The recep-
tion and transfer of an image is digital.
1000-095-071-EN Rev. 1.1
Page 169
Appendix A
Glossary
OMNERA®