Wallstand Short-Cut Zone - Canon Omnera 500A Operator's Manual

4.5.1 Wallstand Short-cut Zone

The Wallstand short-cut zone is defined in front of the Wallstand.
4.5.2 Table Short-cut Zone
The Table short-cut zone is defined above the table top.
Operator´s Manual
2020-09-14
Operating the System
Fig. 4-17 Wallstand short-cut zone
Fig. 4-18 Table short-cut zone
1000-095-071-EN Rev. 1.1
Page 115
Movement Short-cut Zones
OMNERA®