Electrical Installation 12 & 24K - Friedrich VRP12K Service And Parts Manual

Electrical Installation
Electrical Installation
Electrical Installation 12 & 24k
Electrical Installation
Electrical Installation
Remove the Electrical Access Panel (Detail B) to
Remove the electrical access panel (Detail B) to expose the
Remove the Electrical Access Panel (Detail B) to
Remove the Electrical Access Panel (Detail B) to
expose the Incoming Power Terminal Block
incoming Ppwer terminal block (Detail C, see below)
expose the Incoming Power Terminal Block
expose the Incoming Power Terminal Block
(Detail C, see below)
(Detail C, see below)
(Detail C, see below)
Ground
Ground
Ground
Ground
97
INSTALLATION
B
B
B
L1 L2
L1 L2
L1 L 2
L1 L2
Remove and discard hole knock-out from
the side of the unit (Detail A)
Remove and discard hole knock-out from the side
Remove and discard hole knock-out from the side
of the unit (Detail A)
Remove and discard hole knock-out from the side
of the unit (Detail A)
of the unit (Detail A)
Insert all wires through the
punched out hole and fasten
Insert all wires (Green, Black, Red) through the
Insert all wires (Green, Black, Red) through the
wires as follows:
punched out hole and fasten wires as follows:
Insert all wires (Green, Black, Red) through the
punched out hole and fasten wires as follows:
punched out hole and fasten wires as follows:
Green to Ground
Green to Ground
Black to L1
Green to Ground
Black to L1
Red to L2
Black to L1
Red to L2
Red to L2
28