Startup-Process
Heating Operating Mode
•
Press the "Mode" button until the heat icon is
displayed.
•
Use the up and down arrows to ensure that
the set point is higher than the room
temperature.
•
Verify with a temperature measuring
instrument (Dry Bulb or IR Thermometer) for
an increase in temperature at the register or
diffuser. The temperature will vary.
•
The set point can be raised to the maximum
(85F) to force Electric Heat mode depending
on the current room conditions.
•
Example: Air discharge temperature starts at
76F, and is 91F after 3 minutes of heating.
41
OPERATION