Adjusting The Image Position - Epson EV-110 User Manual

Adjusting the Image Position

You can use the Image Shift feature to adjust the image position without
moving the projector.
• This feature is not available if the digital zoom is set to the widest
setting.
a
a Turn on the projector and display an image.
b Adjust the image size using the [Zoom] buttons on the remote control.
When the projector uses optical zoom, you need to switch to digital
zoom by reducing the size of the image until a message is displayed.
c
Press [Enter] to display the Image Shift screen.
d Use the arrow buttons to adjust the image position.
You can shift the image diagonally by pressing any pair of
adjacent arrow buttons on the remote control.
a
e Press the [Esc] button to close the adjustment screen.
The adjustment screen disappears if no operation is performed after
approximately 10 seconds.
• The Image Shift setting is retained even if the projector is turned off.
You need to re-adjust the position if you change the installation
location or angle of the projector.
a
46