Setting the Screen Type
f
Press [Menu] to exit the menus.
You need to restart the projector. Follow the on-screen instructions.
g
Adjust the aspect ratio for the projected image, if necessary.
When the Screen Type setting changes, the EDID settings are
automatically adjusted.
Related Links
g
• "Adjusting the Image Position Using Screen Position"
Adjusting the Image Position Using Screen Position
You can adjust the image position if there are margins between the edge of the
image and the projected screen frame.
You cannot adjust the screen position if the Screen Type setting is set to
16:9.
a
Turn on the projector and display an image.
b
c
p.55
d
Press the [Menu] button on the control panel or remote control.
Select the Installation menu and press [Enter].
Select Screen Position, and press [Enter].
55