Projector Indicator Status - Epson EV-110 User Manual

Projector Indicator Status

Indicator and status Problem and solutions
Power: Off Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
Status: Flashing blue
• Make sure that the Air intake vent, Air exhaust vent
Laser: Off
and the slit in the side of the power supply unit are
Temp: Lit orange
clear, and that the projector is not positioned against a
wall.
• If dust adheres to the Air intake vent, Air exhaust vent,
or the slit in the side of the power supply unit, turn off
the projector, unplug the power plug from the outlet,
and then clean.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's menu.
s Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and
contact Epson for help.
Power: Flashing blue Laser warning.
Status: Indicator status Turn the projector off, unplug it, and contact Epson for
varies help.
Laser: Flashing orange
Temp: Indicator status
varies
Power: Off Laser or retardation plate has a problem.
Status: Flashing blue Turn the projector off, unplug it, and contact Epson for
help.
Laser: Lit orange
Temp: Off
Power: Off A fan or sensor has a problem.
Status: Flashing blue Turn the projector off, unplug it, and contact Epson for
help.
Laser: Off
Temp: Flashing orange
Power: Off Internal projector error.
Status: Flashing blue Turn the projector off, unplug it, and contact Epson for
help.
Laser: Flashing orange
Temp: Off
Wireless LAN status
Wireless LAN indicator Problem and solutions
status
Lit blue Wireless LAN is available.
Flashing blue (quickly) Connecting to a device.
Flashing blue (slowly) An error has occurred. Turn off the projector and then
on again.
Off Wireless LAN is not available. Make sure the wireless
LAN settings are correct.
g g Related Links
• "Cleaning the Air Intake Vent and the Air Exhaust Vent"
150
p.146