Image Shape; Correcting The Image Shape With The Keystone Button - Epson EV-110 User Manual

Image Shape

You can project an even, rectangular image by placing the projector directly
in front of the center of the screen and keeping it level. If you place the
projector at an angle to the screen, or tilt it up or down, or off to the side, you
may need to correct the image shape.
After correction, your image is slightly smaller.
For the best quality images, we recommend adjusting the installation position
of the projector to achieve the correct image size and shape.
g g Related Links
• "Correcting the Image Shape with the Keystone Button"
• "Correcting the Image Shape with Quick Corner"
Correcting the Image Shape with the Keystone
Button
You can correct the shape of an image that is unevenly rectangular.
To correct the distortion in the horizontal and vertical directions
independently, use the [Keystone] button on the remote control.
• You cannot combine H/V-Keystone correction with other image
shape correction methods.
a
• You can correct horizontal keystone distortion up to 40º right or left.
• You can correct vertical keystone distortion up to 45º up or down.
p.42
p.43
a Turn on the projector and display an image.
b Press the [Keystone] button on the remote control, select H/V-
Keystone, and then press [Enter].
You see the H/V-Keystone adjustment screen:
c
Use the arrow buttons on the remote control to select between vertical
and horizontal keystone correction and to adjust the image shape as
necessary.
• V-Keystone
42