Solving Image Or Sound Problems; Solutions When No Image Appears; Solutions When "No Signal" Message Appears - Epson EV-110 User Manual

Solving Image or Sound Problems

Check the solutions in these sections if you have any problems with projected
images or sound.
g g Related Links
• "Solutions When No Image Appears"
• "Solutions When "No Signal" Message Appears"
• "Solutions When "Not Supported" Message Appears"
• "Solutions When Only a Partial Image Appears"
• "Solutions When the Image is not Rectangular"
• "Solutions When the Image Contains Noise or Static"
• "Solutions When the Image is Fuzzy or Blurry"
• "Solutions When the Image Brightness or Colors are Incorrect"
• "Solutions When an Afterimage Remains on the Projected Image"
• "Solutions to Sound Problems"

Solutions When No Image Appears

If no image appears, try the following solutions:
• Press the [A/V Mute] button on the remote control to see if the image was
temporarily turned off.
• Make sure all necessary cables are securely connected and the power is on
for the projector and connected video sources.
• Press the projector's power button to wake it from standby mode. Also,
check if the connected computer is in sleep mode or displaying a blank
screen saver.
• If the projector does not respond when you press any buttons on the
projector, an internal error may have occurred in the projector. Contact
Epson for help.
• Adjust the Brightness setting in the projector's Image menu.
• Adjust the brightness of your projector's light source.
Settings > Brightness Settings
s
• Check the Display setting in the projector's Extended menu to make sure
Messages is set to On.
p.151
p.151
p.152
p.152
p.153
p.153
p.153
p.154
p.154
• The projector may not be able to project copyrighted videos that you play
back on a computer. For more details, see the manual supplied with the
computer.
• For images projected with Windows Media Center, reduce the screen size
from full screen mode.
• For images projected from applications using Windows DirectX, turn off
DirectX functions.
g g Related Links
• "Input Signal Settings - Signal Menu"
• "Image Quality Settings - Image Menu"
• "Projector Feature Settings - Settings Menu"
p.154
• "Projector Setup Settings - Extended Menu"

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:
• Press the [HDMI], [LAN], or [SD ] button on the remote control to switch
the image depending on the input source you want to project.
• Turn on the connected computer or video source, and press play to begin
your presentation, if necessary.
• Check that all cables required for projection are securely connected.
• If you are projecting from a laptop computer, make sure it is set up to
display on an external monitor.
• If necessary, turn off the projector and the connected computer or video
source, and then turn them back on.
• If you are projecting from an HDMI source, replace the HDMI cable with
the shorter one.
g g Related Links
• "Displaying From a Windows Laptop"
• "Displaying From a Mac Laptop"
p.123
p.122
p.124
p.126
p.152
p.152
151