Adjusting The Brightness - Epson EV-110 User Manual

Adjusting the Brightness

You can adjust the brightness of your projector's light source.
a Turn on the projector and switch to the image source you want to use.
b
Press the [Menu] button on the remote control.
c Select the Settings menu and press [Enter].
d Select Brightness Settings and press [Enter].
e Select Light Source Mode and press [Enter].
f Select one of the following options:
• Normal lets you set the brightness to the maximum level. This makes
the light source operation time approximately 20,000 hours.
• Quiet lets you set the brightness to 50% and reduces fan noise. This
makes the light source operation time approximately 20,000 hours.
• Extended lets you set the brightness to 50% and extends the life
expectancy of the light source. This makes the light source operation
time approximately 30,000 hours.
• Custom lets you to select a custom brightness level between 50 to
100%.
If you set the Light Source Mode setting to Custom, select Brightness
g
Level and use the left and right arrow buttons to select the brightness.
h Press [Menu] or [Esc] to exit the menus.
For the best results in maintaining a constant brightness, set the Light
Source Calibration setting to Run Periodically in the projector's Reset
menu.
a
g g Related Links
• "Light Source Operation Time" p.55
• "Projector Specifications" p.166
54