Using ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
g g Related Links
• "ESC/VP21 Command List"
p.108
ESC/VP21 Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has turned
on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a
":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The following commands are available.
Item
Power On/Off
On
Off
Signal selection
HDMI
LAN
SD Player
Spotlight
A/V Mute On/Off
On
Off
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Contact Epson for more details.
Command
PWR ON
PWR OFF
SOURCE 30
SOURCE 53
SOURCE 57
SOURCE 58
MUTE ON
MUTE OFF
108