Adjusting Image Quality (Color Mode); Changing The Color Mode; Available Color Modes; Turning On Automatic Luminance Adjustment - Epson EV-110 User Manual

Adjusting Image Quality (Color Mode)

The projector offers different color modes to provide optimum brightness,
contrast, and color for a variety of viewing environments and image types.
You can select the mode designed to match your image and environment, or
experiment with the available modes.
g g Related Links
• "Changing the Color Mode" p.51
• "Available Color Modes" p.51
• "Turning On Automatic Luminance Adjustment"
• "Adjusting the Gamma" p.52

Changing the Color Mode

You can change the projector's Color Mode using the remote control to
optimize the image for your viewing environment.
a Turn on the projector and switch to the image source you want to use.
b Press the [Menu] button on the remote control.
c Select the Image menu and press [Enter].
p.51

Available Color Modes

Turning On Automatic Luminance Adjustment

d Select Color Mode and press [Enter].
e Select the color mode you want to use from the list and press [Enter].
f
Press [Menu] or [Esc] to exit the menus.
g g Related Links
• "Image Quality Settings - Image Menu"
You can set the projector to use these color modes, depending on the input
source you are using:
Color mode Description
Dynamic This is the brightest mode. Best for prioritizing
brightness.
Normal This tones down the brightness of the image more
than Dynamic, and provides images with natural
colors.
You can turn on Dynamic Contrast to automatically optimize the image
luminance. This improves the image contrast based on the brightness of the
content you project.
a Turn on the projector and switch to the image source you want to use.
b Press the [Menu] button on the control panel or remote control.
51
p.122