Epson EV-110 User Manual page 80

Using External Sensors
• Execute A/V Mute/Release A/V Mute to enable or disable A/V
Mute.
• Start Playlist/Stop Playlist to start or stop playing your playlist from
Favorite Playlists. You also need to select the target playlist in the
Favorite Playlists setting.
• Source Select to switch the image source. You also need to select the
target source in the Source setting.
• Light Source Mode: Normal/Light Source Mode: Quiet to switch
the Light Source Mode setting.
g Select the Combination setting, and then select one of the following
options:
• None to always start the operation set in GPI-1 Settings regardless
of the GPI-2 signal.
• GPI-2 Low to start the operation set in GPI-1 Settings when the
GPI-2 signal falls below a certain voltage.
• GPI-2 High to start the operation set in GPI-1 Settings when the
GPI-2 signal exceeds a certain voltage.
You can check the current value for the GPI-1 and GPI-2 signals
in the GPI Info. menu from DC Out (2.0A)/GPI In Settings.
a
h Select the High -> Low setting, if necessary.
i If you need to add a certain amount of time until the selected operation
is executed, select Hold High or Hold Low.
When the sensor signal is maintained continuously for the set time, the
operation is executed.
You can select from 0 seconds to 30 minutes for the Hold High
and Hold Low settings.
a
j Press [Esc] to return to the previous screen, and then select the GPI-2
Settings option if necessary.
k When you are finished, press [Menu] to exit the menus.
g g Related Links
• "Connecting to External Sensor Devices"
80
p.28