Projector Reset Options - Reset Menu - Epson EV-110 User Manual

Projector Reset Options - Reset Menu

You can reset most of the projector settings to their default values using the
Reset menu.
Setting Options
Refresh Mode
Timer
Messages
Start
Description
Clears any projected afterimages and
turns off the projector after a specified
period of time.
You can also set Schedule Settings for
Refresh Mode in the projector's
Extended menu.
Sets a time period during which the
projector displays the refresh image.
Set to On to display a message informing
you that the projector is in refresh mode.
Starts the refresh mode process.
Under the following conditions, Refresh
Mode stops automatically and the
projector turns off.
• When receiving Message Broadcasting
• When receiving an error notification
• When a retardation plate warning
(error) occurs
Setting Options
Light Source
Calibration
Run Now
Run Periodically
Schedule Settings
Last Run
Reset All Config —
You cannot reset the following settings using the Reset All Config option:
• User's Logo
• Startup Screen *
• Color Uniformity
• Color Matching
• Schedule Settings
• Language
• Date & Time
• Network menu items
• Password
• Operation Hours
• Light Source Info
* Only when you set the User's Logo Protection setting to On in the
Password Protection setting menu.
139
Description
Select options to perform light source
calibration to maintain the color balance
of the projected image.
Starts light source calibration right away.
You may not be able to start the
calibration depending on the
environmental temperature. (Wait 20
minutes after turning on the projector
before performing light source
calibration for maximum accuracy.)
Set to On to perform light source
calibration periodically every 100 hours
of usage.
Moves to the Schedule Settings screen.
Displays the date and time of the last
light source calibration.
Resets most of the projector settings to
their default values.