Saving A User's Logo Image - Epson EV-110 User Manual

Saving a User's Logo Image

You can save an image on the projector and display it whenever the projector
turns on.
This image is called the user's logo screen. You can select a photo, graphic, or
company logo as the user's logo, which is useful in identifying the projector's
owner to help deter theft. You can prevent changes to the user's logo by
setting up password protection.
• If the User's Logo Protection setting is set to On in the Password
Protection setting menu, set to Off before saving the user's logo.
a
• When you copy the menu settings from one projector to another
using the batch setup feature, user's logo is also copied. Do not
register the information that you do not want to share between
multiple projectors as a user's logo.
• You cannot save content that is protected by HDCP.
a Display the image you want to project as the user's logo.
Press the [Menu] button, select the Extended menu, and press [Enter].
b
c Select User's Logo > Start Setting and press [Enter].
You see a prompt asking if you want to use the displayed image as a
user's logo.
Adjustments such as Keystone, Zoom, Aspect, or Scale are
temporarily canceled when you select User's Logo.
a
d Select Yes and press [Enter].
e Check the displayed image, and then select Yes to save it as the user's
logo.
The user's logo is overwritten and a completion message is displayed.
f Press [Esc] to exit the message screen.
g Select the Extended menu and press [Enter].
h Select Display and press [Enter].
i Select On as the Startup Screen setting if you want to display the User's
Logo screen whenever you turn the projector on.
To prevent anyone from changing the User's Logo settings without first
entering a password, set the User's Logo Protection setting to On in the
Password Protection setting menu and set the password.
g g Related Links
• "Selecting Password Security Types" p.77
66