Connecting To External Speakers; Connecting To Bluetooth Audio Devices - Epson EV-110 User Manual

Projector Connections

Connecting to External Speakers

You can connect the projector to external self-powered speakers. You can
control the volume using the projector's remote control.
• You can also connect the projector to an amplifier with speakers.
a
a
Make sure your computer or video source is connected to the projector
with the necessary video cables.
b
Locate the appropriate cable to connect your external speakers, such as
a stereo mini-jack-to-pin-jack cable, or another type of cable or adapter.
c Connect one end of the cable to your external speakers as necessary.
d Connect the stereo mini-jack end of the cable to your projector's Audio
Out port.
g g Related Links
• "Projector Setup Settings - Extended Menu"
• "Adjusting the Brightness" p.54
p.126
Connecting to Bluetooth
You can connect your projector to Bluetooth audio devices (A2DP compliant)
such as speakers or headphones to output audio from the following sources:
• HDMI
• LAN
• SD
To output audio to Bluetooth audio devices, select On as the Bluetooth
Audio setting in the projector's Settings menu.
• There is a delay in the audio output to any Bluetooth audio devices.
• Bluetooth audio devices are not supported in some countries and
a
regions.
• Use Bluetooth audio devices that support the SCMS-T standard.
a
Turn on the projector and switch to the image source you want to use.
b Press the [Menu] button on the remote control.
® Audio Devices
26