Projector Setup Settings - Extended Menu - Epson EV-110 User Manual

Projector Setup Settings - Extended Menu

Setting Options
HDMI EQ Setting
Advanced
Date & Time
Standby Mode
Standby Mode
Description
Adjust the HDMI input signal level
depending on the devices connected to
the HDMI port. If there is a lot of
interference in the image, or if a problem
such as no image being projected occurs,
change the setting.
If no images are displayed using a
thumb-sized media streaming device,
select 1.
Select All as the Batch Setup Range
setting to copy all of the projector menu
settings using the batch setup feature.
Select Limited, if you do not want to
copy the following settings:
• Password Protection settings
• Network menu settings
Adjusts the projector's system time and
date settings.
• Daylight Saving Time: set to On to
activate daylight saving time.
• Internet Time: set to On to update the
time automatically through an Internet
time server.
Available when you have set DC
Out/GPI In to On While Project/Off.
Set to Communication On to allow
monitoring and controlling the projector
over a network when the projector is in
standby mode.
When monitoring or controlling the
projector using wireless LAN, set
Connection Mode to Advanced.
s Network > Network Configuration
> Wireless LAN > Connection Mode
Setting Options
Port
DC Out (2.0A)/GPI
In Settings
DC Out/GPI In
127
Description
Selects the port to use from Wired LAN
or Wireless LAN while the Standby
Mode setting is set to Communication
On.
Select which operation to execute
depending on the input signal from the
device, such as when an external sensor
is connected to the DC Out (2.0A) / GPI
In port.
Enables or disables GPI-1 Settings and
GPI-2 Settings. Set to Always On/On to
enable the GPI settings.
Also, set to Always On/On to keep the
external sensor device operating and
continue supplying power to the
streaming media player when the
projector is not projecting images. This
lets the device start earlier, or perform
updates automatically over a network if
necessary.