Table of Contents
Advertisement
Projector Indicator Status
The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
• If the indicators display a pattern not listed in the table below, turn
a
the projector off, unplug it, and contact Epson for help.
On/Standby (power) indicator
Status indicator
B
Laser indicator
C
Temp (temperature) indicator
D
Projector status
Indicator and status
Problem and solutions
Power: Lit blue
Normal operation.
Status: Lit blue
Laser: Off
Temp: Off
Power: Lit blue
Warming up or shutting down. When warming up, wait
about 30 seconds for an image to appear.
Status: Flashing blue
All buttons are disabled during warm-up and shutting
Laser: Off
down.
Temp: Off
Power: Lit blue
Standby, sleep mode, or monitoring.
Status: Off
When you press the power button, projection starts.
Laser: Off
Temp: Off
Power: Flashing blue
Preparing for monitoring or quick startup mode. All
features are disabled.
Status: Off
Laser: Off
Temp: Off
Power: Flashing blue
Projector is too hot.
Status: Indicator status
• Make sure that the vents and air filter are not clogged
varies
with dust or obstructed by nearby objects.
Laser: Indicator status
• Clean or replace the air filter.
varies
• Make sure the environmental temperature is not too
Temp: Flashing orange
hot.
264
Advertisement
Table of Contents
