Device Replacement; Device Replacement Requirements; Replacing The Electronics Cover - SEW-Eurodrive MOVISAFE CSB51A Manual

11.6

Device replacement

11.6.1

Device replacement requirements

An incorrect parameterization of the safety option is enabled if the memory module
is inserted incorrectly.
Severe or fatal injuries.
•
•
81
•
11.6.2

Replacing the electronics cover

To replace the electronics cover, you must perform the following steps:
1. Switch off the basic device to be replaced.
2. Open the screw fitting of the electronics cover. Remove the plugged-in memory
3. Replace the electronics cover (including the MOVISAFE
4. Insert the memory module that was removed in step 2 into the new electronics
5. Switch on the basic device again. Carry out a functional test. The checking of all
The replacement of the electronics cover is detected automatically and the applica-
tion-related
MOVISAFE
same state that it was in before the replacement of the electronics cover. This means
that the MOVISAFE
wards if it was in the "Accepted" state before the replacement of the electronics cover.
A function test of the safety option is required after the replacement of the electronics
cover.
WARNING
Ensure that the memory module matching the application is inserted at the cor-
rect system position.
In safety-related applications,
®
MOVISAFE CSB51A safety option that are marked with the FS81 logo for func-
tional safety may be used. Observe the information on the FS81 logo in the operat-
ing instructions of the respective basic device.
In safety-related applications, replace an electronics cover only with an electronics
cover with the same FS logo.
module from the electronics cover.
cover. Mount the electronics cover.
parameters is omitted.
data set is
®
CSB51A. The MOVISAFE
®
CSB51A safety option will be in the "Accepted" state again after-
only electronics
loaded from the memory
®
CSB51A safety option is subsequently in the
Manual – MOVISAFE
Service
Device replacement
covers with the
®
CSB51A safety option).
module into the
®
CSB51A Safety Option
11
45