Operating States; Operating State "Operation; Operating State "Parameterization; Operating State "Safe State" After Critical Fault - SEW-Eurodrive MOVISAFE CSB51A Manual

7.5

Operating states

The MOVISAFE
states:
•
•
•
7.5.1

Operating state "Operation"

In the "Operation" operating state, the selected drive safety functions are executed in
accordance with the parameterization (see chapter "Parameterization of the drive
safety functions").
7.5.2

Operating state "Parameterization"

In the "Parameterization" operating state, the MOVISAFE
safe state. MOVISAFE
during
MOVISAFE
7.5.3

Operating state "Safe state" after critical fault

No F-process data communication occurs in the "Safe state" operating state. The out-
put F-DO_STO is disabled internally. The "Safe state" operating state can be resolved
only by deactivation and reactivation.
7.6

Safety-relevant acceptance

The proper functioning of the drive safety functions is not guaranteed without a
safety-relevant acceptance.
Severe or fatal injuries.
•
To ensure the correctly parameterized drive safety functions, you must perform verific-
ation and documentation of the parameters once startup and parameterization have
been completed. This is supported by the "Assist CS.." parameterization tool, integra-
ted in MOVISUITE
7.6.1

Sequence

After a successful startup, you must confirm that the data of the acceptance report
matches the parameters on the safety option. You must identify and protocol the val-
ues parameterized for the drive safety functions individually by performing a function
test. You may must take this into account in the machine and system controls.
®
CSB51A safety option distinguishes between the following operating
Operation
Parameterization
Safe state after critical error
®
CSB51A can be parameterized in this state. If an error occurs
the parameterization,
®
CSB51A remains in the "Parameterization" state.
WARNING
Verify every single drive safety function.
®
, in the form of an acceptance protocol.
®
CSB51A safety option is in
e.g., a violation of
Manual – MOVISAFE
Startup
7
Operating states
a plausibility rule,
27
®
CSB51A Safety Option