Service; Modification/Changes To The Device; Status Leds - SEW-Eurodrive MOVISAFE CSB51A Manual

Service

11

Modification/changes to the device

11 Service
11.1 Modification/changes to the device
11.2

Status LEDs

38
Manual – MOVISAFE
• Firmware modifications
Only SEW‑EURODRIVE is authorized to make changes to the firmware.
• Repair
Only SEW‑EURODRIVE is authorized to repair the CSB51A safety option.
• Warranty
INFORMATION
The safety certification and any right to claim under limited warranty of
SEW‑EURODRIVE become void if the user modifies the device internally (e.g. ex-
change of components, welding parts).
WARNING
Danger due to incorrect interpretation of the LEDs "F-RUN" and "F-ERR"
Severe or fatal injuries
• The LEDs are not safety-related and may not be used as a safety device.
INFORMATION
• "Slow" flashing frequency means that the LED is flashing at 0.5 Hz.
• "Fast" flashing frequency means that the LED is flashing at 2 Hz.
• The "flashing sequence" state means that both LEDs of the assembly alternately
flash in yellow or green. The LED color is alternately assigned to the LEDs, e.g. F-
RUN LED flashes green, F-ERR LED flashes yellow and vice versa.
®
CSB51A Safety Option