Printer Status Messages; How To Use The Control Panel - Brother HL-2700CN series User Manual

Printer status messages

The following table shows the printer status messages that are displayed during normal operation:
Printer status message
READY
PRINTING
RESOLUTION ADAPT
PROCESSING
JOB CANCELLING
PAUSE
WARMING UP
SLEEP
PRESS SET TO PRINT
RESET TO FACTORY
SETTING
SELF TEST
RAM SIZE=xxMB
NOW INITIALIZING
PROGRAMING-WAIT

How to use the control panel

When you use the Menu buttons (+, -, Set or Back), remember the following basic steps:
If no control panel operations are performed for 30 seconds, the LCD automatically returns to Ready
state.
When you press the Set button to choose a setting, an asterisk appears briefly at the end of the
display. After that, the display returns to the previous menu level.
After changing the status or a setting, pressing the Back button before you press the Set button will
cause the display to return to the previous menu level with the original settings unchanged.
There are two ways to input numbers. You can press the + or - button to scroll up or down one
number at a time, or you can hold down + or - to scroll faster. The blinking number is the one that you
can change.
Meaning
Ready to print.
Printing.
Printing with reduced resolution.
Busy processing data.
Cancelling the job.
The printer has suspended its operations. Press the
again.
The printer is warming up.
In sleep status
Set
Press the button to start printing.
The printer settings return to the factory settings.
Performing self-diagnostics.
This printer has XX MB memory.
The printer is setting up.
Accessing CompactFlash card.
Go
button to start the printer
CONTROL PANEL 3 - 7