Printer Status Messages - Brother HL-3260N User Manual

!

Printer status messages

The following table shows the printer status messages that are displayed
during normal operation:
P r i n t e r S t a t u
P r i n t e r S t a t u
P r i n t e r S t a t u
READY READY
READY READY
PROCESSING PROCESSING
PROCESSING PROCESSING
SLEEP SLEEP SLEEP SLEEP
PRINTING PRINTING PRINTING PRINTING
SELF TEST SELF TEST SELF TEST SELF TEST
PAUSE PAUSE PAUSE PAUSE
NOW INITIALIZING NOW INITIALIZING NOW INITIALIZING NOW INITIALIZING
WARMING UP WARMING UP
WARMING UP WARMING UP
MEMORY SIZE=xx MB MEMORY MEMORY MEMORY SIZE=xx MB SIZE=xx MB SIZE=xx MB
JOB CANCELLING JOB CANCELLING JOB CANCELLING JOB CANCELLING
RESOLUTION ADAPT RESOLUTION ADAPT
RESOLUTION ADAPT RESOLUTION ADAPT
PRESS SET TO PRINT PRESS SET TO PRINT PRESS SET TO PRINT PRESS SET TO PRINT
RESET TO FACTORY RESET TO FACTORY RESET TO FACTORY RESET TO FACTORY
SETTING SETTING
SETTING SETTING
s M e s s a g e M e a
s M e s s a g e M e a
s M e s s a g e M e
The printer is ready to print.
The printer is busy processing data.
The printer is in sleep (power save) mode.
The printer is printing.
The printer is performing self-diagnosis.
The printer has suspended printing or feeding paper.
Pressing the
feeding.
The printer is setting up.
The printer is warming up.
This printer has xx MB memory.
The printer is cancelling the job.
Printing with reduced resolution.
Press the
The printer settings have been restored to the
factory settings.
n i n g
n i n g
a n i n g
Go switch resumes printing/paper
Set switch to start printing.
3-19
CHAPTER 3 CONTROL PANEL