Replacing The Toner Cartridges - Brother HL-2700CN series User Manual

Replacing the toner cartridges

Do not put the toner cartridge into a fire. It could explode.
Brother strongly recommends that you do not refill the toner cartridge provided with your printer.
We also strongly recommend that you continue to use only Genuine Brother Brand
replacement toner cartridges. Using or attempting to use potentially incompatible toner and /or
toner cartridges in your printer may cause damage to the printer itself and/or it may result in
unsatisfactory print quality. Our warranty coverage does not apply to any problem that was
caused by the use of unauthorized third party toner and toner cartridges. To protect your
investment and guarantee your print quality please continue to replace consumed toner
cartridges with only Genuine Brother Branded Supplies.
Printing with a third-party toner or third-party toner cartridges may reduce not only the print
quality but also the quality and life of the printer itself. It may also cause serious damage to the
performance and life of a drum unit. Warranty coverage does not apply to problems caused by
the use of third-party toner or third-party toner cartridges.
We recommend that you clean the printer when you replace the toner cartridge. See Cleaning on
page 5-21.
To replace the toner cartridge, follow these steps:
1
Open the front cover of the printer.
2
Pull out the used toner cartridge.
3
Take the new toner cartridge out of the box.
Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wipe
or wash it off with cold water.
Be sure to seal up the toner cartridge tightly so that toner powder does not spill out of the
cartridge.
Discard the used toner cartridge according to local regulations, keeping it separate from
domestic waste. If you have questions, call your local waste disposal office.
Figure 5-1
ROUTINE MAINTENANCE 5 - 5